Inland Marine Insurance in Texas: Protecting Contractor Tools and Cargo

November 20, 2026

Inland marine insurance for Texas contractors: what it covers and why you need it

If you run a contracting business in Texas, your tools and equipment are your livelihood. A stolen generator on a Keller job site, a drill press damaged in transit to a Southlake remodel, concrete forms destroyed in a DFW hailstorm while stored at a staging yard. Any one of those losses can shut down a job and cost you thousands. Inland marine insurance for Texas contractors is designed to cover property that moves, gets stored off-site, or sits exposed on a job site where a standard commercial property policy will not reach.

What inland marine insurance actually covers

Despite the name, inland marine has nothing to do with boats or coastal waters. The term comes from the historical evolution of cargo insurance, coverage that followed goods overland the way marine insurance followed ships at sea. For contractors today, it is a broad category that protects movable and high-value property wherever it happens to be.

Common coverages under a contractor's inland marine policy include:

  • Contractors equipment floater : covers owned tools and equipment (power tools, compressors, laser levels, scaffolding) against theft, vandalism, and physical damage, whether the equipment is at a job site, in your truck, or at your shop.
  • Equipment rental coverage : pays the cost to repair or replace rented equipment you are responsible for while it is in your care.
  • Installation floater : covers materials and equipment that have been purchased but not yet permanently installed, such as HVAC units sitting on a pad or cabinets stacked in a framed-out room.
  • Builders risk : technically a related but separate line, it covers the structure under construction itself. Many contractors carry both. (See our page on builders risk insurance for a closer look at that coverage.)
  • Transit coverage : pays for property damaged while being transported in a company vehicle or by a freight carrier.
  • Leased/borrowed equipment : covers gear you do not own but are contractually responsible for.

The main difference between inland marine and a standard commercial property policy is portability. Commercial property covers assets at a fixed, scheduled location. Inland marine follows your property wherever the job takes it.

Why Texas contractors face above-average property risk

Texas has some of the highest rates of equipment theft in the country. The National Equipment Register has consistently ranked Texas among the top states for construction equipment theft, with the Dallas-Fort Worth metro being a particularly active area for thieves. A mid-sized skid steer or track loader can disappear from an unattended site overnight and show up in another state or across the border within 48 hours.

Weather adds another layer. North Texas contractors working in Denton, Flower Mound, Roanoke, and surrounding communities know what spring storm season looks like: large hail, high straight-line winds, and the occasional tornado warning that sends everyone off site fast. Equipment and materials left exposed when a storm rolls through can take significant damage, and a standard commercial auto policy will not cover tools in the back of a truck if the loss is caused by weather rather than a collision.

Job site theft is also a persistent problem on residential builds in growing communities like Northlake, Justin, and Haslet, where new subdivisions are going up fast and sites are difficult to secure overnight. Copper wire, power tools, and smaller equipment walk off regularly.

How much does contractor inland marine insurance cost in Texas?

Rates depend on several factors and vary more than most contractors expect. Variables include:

  • Total insured value : the aggregate replacement cost of all covered equipment and tools.
  • Type of equipment : heavy equipment like excavators and forklifts costs more to insure than hand tools and small power equipment.
  • Deductible chosen : higher deductibles lower the premium, but make sure you can absorb the out-of-pocket cost if a claim hits.
  • Theft security measures : GPS tracking on equipment, locked storage, and alarm systems on your shop or yard can earn meaningful discounts with some carriers.
  • Claims history : a clean record keeps premiums down. Repeat theft or damage claims will push rates up at renewal.
  • Trade type : electrical, HVAC, plumbing, framing, and general contracting each carry different risk profiles in underwriters' eyes.

For a small electrical or plumbing contractor with $50,000 to $100,000 in total equipment value, annual premiums typically run in the $800 to $2,000 range depending on the factors above. Larger operations with heavy equipment and a broader geographic footprint can see premiums well into the five-figure range. An independent agent can shop multiple carriers to find the right balance of coverage and cost for your situation.

What inland marine does not cover (and what fills the gaps)

Inland marine is broad, but it is not all-encompassing. Know these gaps before assuming you are covered:

  • Employee dishonesty and theft : inland marine covers theft by outsiders. If an employee steals your tools, you typically need a crime policy or commercial crime endorsement.
  • Mechanical breakdown : wear and tear, breakdown, and equipment failure due to mechanical causes are generally excluded. Equipment breakdown coverage is a separate product.
  • Property of others beyond your legal liability : if a subcontractor's tools are stolen from your site, your policy may not cover their loss unless you have specific coverage for property of others in your care, custody, and control.
  • Business interruption : loss of income because your equipment is out of commission is not part of a standard inland marine policy. A Business Owners Policy (BOP) can add business income coverage for eligible contractors.
  • Liability for property damage you cause to others : that falls under general liability insurance, which every Texas contractor should carry separately.

The right coverage program for most contractors combines inland marine, general liability, commercial auto, and workers compensation. Our contractor insurance guide for Texas walks through how those pieces fit together.

Choosing the right policy: scheduled vs. blanket coverage

When you sit down with an agent to build your inland marine policy, you will likely encounter two approaches to covering your equipment.

Scheduled coverage

Each piece of equipment is listed individually with a specific insured value. This approach works well for high-value items like excavators, boom lifts, or specialized diagnostic equipment. The downside is administrative: every time you buy a new tool or piece of equipment, you need to call your agent to add it to the schedule, or it will not be covered.

Blanket coverage

A single coverage limit applies to all eligible equipment without listing each item separately. It is simpler to manage and automatically picks up new purchases up to the policy limit. The trade-off is that you need to make sure the blanket limit is high enough to cover everything. If your total equipment value exceeds the limit, you are a co-insurer on the excess.

Many contractors use a hybrid approach: schedule the big-ticket items individually and carry a blanket limit for smaller tools and equipment. Your agent can help you determine which structure makes the most sense given your inventory and how frequently your equipment list changes.

Questions to ask before you buy

Not all inland marine policies are built the same. When reviewing options, ask these questions:

  • Is coverage on a replacement cost or actual cash value basis? Replacement cost pays what it costs to buy a comparable new item. Actual cash value (ACV) deducts depreciation, which can leave a significant gap on older equipment.
  • Are there sublimits for tools left in unattended vehicles? Many policies cap coverage for theft from vehicles at a lower limit, sometimes as low as $2,500 to $5,000. If your crew routinely leaves expensive tools in trucks overnight, this matters.
  • Does the policy cover rented equipment automatically? Some do; some require an endorsement.
  • What territories are covered? If you take jobs outside Texas, make sure the policy follows you.
  • Is there a per-occurrence deductible or a per-item deductible? A theft event that takes five pieces of equipment should not trigger five separate deductibles unless the policy specifically states that.

Get the right inland marine coverage for your Texas contracting business

Taylor Reed Insurance is an independent agency serving contractors and small businesses across North Texas, including Keller, Southlake, Denton, and the surrounding communities. Because we work with multiple carriers, we can compare policy terms and pricing side by side rather than being limited to a single company's options. That means you get coverage that fits how your business actually operates, not a generic policy that leaves gaps.

If you are not sure what your current policy covers, or if you are building out a new coverage program from scratch, we are happy to walk through it with you. Call us at (817) 350-4485 or visit our contact page to get started. You can also explore our inland marine insurance page for a quick overview of what we offer.

Telephone icon with speech bubble.

Get A Quote

At Taylor Reed Insurance, securing your future is easy. Ready to protect what matters? Contact us for a quick quote and personalized insurance options!

Black telephone handset icon.

Kelly

i
Kelly is not a licensed insurance agent. Only licensed agents can provide quotes or coverage recommendations. Calls may be reviewed for quality and training purposes.

Speak to Kelly 24/7

Microphone icon.

Microphone ready


Black check mark.

Start your custom insurance quote

Black check mark.

Instant answers to your insurance questions

Black check mark on a white background.

Schedule appointments or follow-ups

Personal Insurance

Personal Insurance

From auto and homeowners to renters and umbrella policies, we help protect your family and property. Let’s find coverage that fits your life.

Business Insurance

Commercial Insurance

We customize policies for your industry's risks, like general liability and workers' comp, ensuring you can run your business worry-free.

Share this article

Recent Posts

Small business owner reviewing insurance documents at a desk in a North Texas office
By Taylor Reed Insurance • November 17, 2026
BOP vs general liability insurance in Texas? Learn what each covers, what it costs, and which fits your North Texas small business. Ask Taylor Reed Insurance.
Southlake Texas downtown Town Square area with commercial storefronts and pedestrians on a sunny afternoon
By Taylor Reed Insurance • November 14, 2026
Find the right general liability insurance for your Southlake, TX business. Taylor Reed Insurance compares carriers to protect you from costly lawsuits.
Semi-truck driving on a Texas highway at sunrise with the DFW skyline visible in the distance
By Taylor Reed Insurance • November 11, 2026
Learn what trucking insurance in Texas covers, FMCSA minimums, cost factors, and how to build the right policy for owner-operators and fleets in North Texas.